Description
Ordering Number Logic
Product Features
- 220-240Vac 50/60 Hz;
- 180lpw at system level;
- 110°、85°、55 ° three beam angles available;
- Available in non-dim、0-10V dimming、DALI；
- IP65、IK08;
- 5 years warranty;
- Surge protection: L-N: 4KV; L/N-GND: 6KV, residual
- voltage less than 2KVac;
- All-round protection: over temperature protection,
- over voltage protection, short circuit protection;
- 0-10V dimming series has an auxiliary 12V wire to
- connect with sensor module to help save more
- energy or connect with DALI module making
- compatible with DALI dimming system;
- Output current adjustable via a DIP switch;
- Optional Tool-Free Driver Maintenance.
Basic Parameter( Ta=25℃)
Electrical Parameters( Ta=25℃)
0-10V Dimming Operation
- Connect 0-10V signal to DIM terminal.
- In 0-10V dimming mode, when the input voltage is 0.8V
- ±0.15, the light turns off; when it’s 1.0V±0.2, the light turns on.
- Dimming depth: 10% (typical value)
- DIM+/- (without signal connected): 100% rated current output
PWM Dimming Operation
- Connect PWM signal to the DIM terminal.
- Dimming depth: 10% (typical value)
- Compatible signal range: 1000-3000(Hz), amplitude: 9-10(V)
- DIM+/- (without signal connected): 100% rated current
Rx Dimming Operation
- Connect Rx signal to the DIM terminal.
- Range: 0-100KΩ
- DIM+/- (without signal connected): 100% rated current
DALI Dimming Operation
- Default maximum output for DALl is 100%
- DALl signal is connected to DA1 and DA2
- DALl protocol includs 16 groups of 64 bit digit lP addresses
- Minimumoutput output for DALl is 10%
Max. No. of PSUs on 16A circu it breaker( Test Con dition 230Vac 50Hz Ta=25 ℃)
Lumen Output ( Test Condition 230Vac 50Hz Ta=25℃ )
Light Distribution
Operating Ambient TemperatureVS Lifetime
Product Dimensions
Mounting & Accessories
Optional Tool Free Driver Replacement
Ordering Information
